Complete system: Nozzle, mixing ELEMENTS, FILTER

An innovative solution for injection molding: LMS mixing elements for SMN nozzles

OUR LMS (LAMINAR MIXING ELEMENTS):

• Optimize thermal homogeneity in injected melt
  
  
• Save up to 30% of masterbatches colour or additives
  
  
• Optimize the general look and mechanical quality of the fial product
  
  
• Speed up production
  
  
• They are 100% disassembling and reassembling for inspection and cleaning

SMN-F filter unit

• It guarantees the best disposal of residual particle, such as: iron, aluminium, copper, carbon deposits, molten material lumps etc.
  
  
  
• It has been designed in order to prevent stagnation, which avoids overheating and decomposition
  
  
  
• Highly wear resistant, it could be used with every thermoplastic material
  
  
  
• It reassembles, after mixing, the whole melt flow in the best injection direction

 

 

the steel X40CrMoV51 filters, are available on the following sizes:

The SMN-F filters has the size of two LMS elements

 

 

the SMN-F unit filtering area is around 1mm2.

These filters can cushion lamination press screw vibrations, also disposing row material particles. They would therefore fixed to the top edge of LMS static mixers.

 

 

The optimal configuration would be as follows:

 

Omnia Technologies can supply, at the best price ever, threaded nuzzle, together with mixing devices and filter, ready for the assembly on the press.

 

 

 

AN INNOVATIVE SOLUTION FOR INJECTION PRINTING: LMS MIXING DEVICES WITH FILTERING UNIT

These mixers, together with filtering devices are the best solution available on the market..

The system:

• Has no moving parts (no maintenance needed)
• High mechanical resistance
• Improves mixing procedure
• Allows printing at a constant viscosity, even with regrind materials
• Guarantees an uniform flow within the printing system collector
• The SMN-F filter could be assembled before or after the mixing devices, depending on the quantity of material residual particles.

IMPORTANT: When processing materials or polymers containing glass fibres or inorganic charges, the mixers and filters have to be specialy nitrified up to 3000 Vickers in order to impede a rapid wear of the components.

Nozzle size with specific molding machinery and polymer

In nozzle assembling, please consider a +0.1/+0.2 margin on total length of the interior mixers and 0.06 mm on external diameter

Please, you can fill in the form and send to: info@omniatechnologies.net

Information:
OMNIA TECHNOLOGIES LTD ITALY
Mobile (+39) 3474140849 - (+39) 3924463141
Telephone (+39) 0516270824
E-MAIL:
Technical request: info@omniatechnologies.net
Administration: carlotta.bernardini@omniatechnologies.net